I have an Intel PD440FX motherboard with AMI Bios in a Micron PC running Win98SE.
In order to use a 15 Gig. HDD I am attempting to update the bios,currently 1.00.02.DT05. According to the documentation with file PD_BIOS9.EXE from Intel, version 1.00.07 or greater is needed to support drives over 8.3 Gig.
Followed directions with bios file carefully. While creating bootdisk (in Windows using directions in file) received a message ulib.dll not found, however the command.com and dos.sys files were created on the disk and the system did boot and run the Iflash utility. Other files were expanded and copied to the boot disk without error.
When booting from the disk all worked as expected, however when the flash process progress bar reached about 50% I got the following messages:
L05: Unable to prepare for flash
H02: Initialization for flash programming failed
Error: Flash update was unsuccessful
Can anyone help me with how I can update this bios.
THANKS.
In order to use a 15 Gig. HDD I am attempting to update the bios,currently 1.00.02.DT05. According to the documentation with file PD_BIOS9.EXE from Intel, version 1.00.07 or greater is needed to support drives over 8.3 Gig.
Followed directions with bios file carefully. While creating bootdisk (in Windows using directions in file) received a message ulib.dll not found, however the command.com and dos.sys files were created on the disk and the system did boot and run the Iflash utility. Other files were expanded and copied to the boot disk without error.
When booting from the disk all worked as expected, however when the flash process progress bar reached about 50% I got the following messages:
L05: Unable to prepare for flash
H02: Initialization for flash programming failed
Error: Flash update was unsuccessful
Can anyone help me with how I can update this bios.
THANKS.