BIN File for PHONE 30 Expansion Module

[classydreams]

Thought I would post this a different way.

I am having trouble resetting a PHONE 30 Module that is only showing a RED indicator when plugged in and can not seem to find the correct BIN file. Does anyone have this file or know what the name is and where I should look? I have looked in Manager 5.0 thru 9.0 and can not find it. Thanks

 

[holdmusic34]

Are you hanging from ceiling of something?

Try dis bruv.

thread940-1754451

Why spoil your little dreams? Why put you through the hate?

 

[amriddle01]

I have various versions of Manager installed and it's in every Manager folder I have, here is R8 for example:

And R9:

If you can't see it or work out what you're doing wrong, then there is little we can help you with

 

[classydreams]

Yes thank you I found that thread and followed the directions but I get to the point when the module just says TFTP ERROR over and over again when I plug it in.

 

[holdmusic34]

Tftp disabled in security settings?
Put a static address in the manager config.

Why spoil your little dreams? Why put you through the hate?

 

[intrigrant]

As said, if you don't have experience on IP Office then call someone who does. It is not as simple as it seems to be.
Many years I had a FAQ with detailed instructions but as IP400 units are end of sale for over two years I decided to delete the FAQ.

 

[intrigrant]

I reposted my deleted FAQ on special request from another MPV : IP400/500 Expansion module recovery

 

[classydreams]

Thank you very much for all of the pointers.