Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Big troubles using client 3.6.2a 1

Status
Not open for further replies.

bas95

Technical User
Aug 22, 2002
31
NL
Dear all,

Until this moment I used the VPN client version 3.5.1, without any problem.

I upgraded this client to version 3.6.2a and from now I not able to setop a VPN session.

I also tried to install this new client on a fresh w2k installation, with the same problem.

The event log shows the message:

5 13:25:25.583 11/13/02 Sev=Warning/3 DIALER/0xE3300008
GI VPNStart callback failed "CM_IKE_ESTABLISH_FAIL" (3h).

Any idea..??

Regards,


Bastiaan van Utrecht
Shimano


 
The new version of the client (3.6) no longer supports SHA, this is probably the reason the version doesn't work.

You need to change the following things...

crypto ipsec transform-set XXXXX esp-des esp-sha-hmac

change to:

crypto ipsec transform-set XXXXX esp-des esp-md5-hmac


Also change the isakmp policy,

isakmp policy 8 hash sha

change to:

isakmp policy 8 hash md5

----

Sunyasee B-)
 
Yes, that was the right solution..

Thanks for your reply..


Bastiaan van Utrecht
Shimano

 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top