BIG problem with my 3X8 6

[curlycord]

Not sure why but I cant get the PRI, N.A.M. 4.1 and Companion C200 to work ...it's a 3X8 DR1 NON DS.

 

[sprucegrover]

Aren't you about 107 days early?

 

[MarvO1]

Curly, You've lost it. They are working you too hard. Slow down son.

MarvO said it

 

[exsmogger]

Curlycord,

Just when I thought I was getting burned out on this forum and was going to take a break. Thanks for the laugh!

Brian Cox

http://www.jandjcommunications.com

 

[LKev]

Even in caps, BIG is an understatement. lol.

 

[lowradiation]

1st - take the cover off the 3X8

2nd - insert your DTI card - you may have to cut it in half and drill a few screws into it to hold it in place

3rd - For the NAM 4.1 use some duct tape to attach the fibre to the 3X8

4th - Sit down on top of the Companion C200 and have yourself a coffee break after all the work you have done.

2 hours later...

5th - Go into Feature **CONFUSED then hit NEXT until you see the heading MAKE NORSTAR WORK - N and change it to Y

That's all there is to it.

You're welcome in advance.

 

[Telephoner1958]

I'm sorry,,,,,,
I've haven't laughed this hard in a long time!!
I hope this was meant to have this affect!!
Thanks for the pick me up!!!

 

[hawks]

maybe dr2 will work..............

 

[Arr]

Low Rad,
You forgot to tel Curly how to use the debug procedure.
He will of course need the new FastRaid. Primarily used on a Nortel Known Bug, FastRaid will retro launch with CP100 Rls II as a preventitive measure.

PhM

 

[hawks]

ARR I thought the DEBUG procedure was dropping it from somewhere around 25 ft. That must be what I was doing wrong

 

[Arr]

Hawks,
Boy o boy. You sure did mate. You described a dropped call there. But to really get inside programming, drift the thing down from 100 ft and REALLY get into the guts of the KSU eh?

PhM

 

[telemarv]

You need to take the cover right off and replsce it with a fibre expansion card... its a tight fit so you might need a hammer to get the card in. Then you'll be able to expand the 3x8

Merry HoHo

Marvy

 

[gsumners]

That's definitely a good grinner for sure!

Don't forget to set the PEBCAP option to Y....

 

[curlycord]

and the winner is......
Lowrad!!!!
haha

Cheers
CC

 

[lowradiation]

Wow, 3 stars - If only there was a way to make money giving fake advice...