Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

BGP on Access Router on 64k line 1

Status
Not open for further replies.

schofs

IS-IT--Management
Mar 9, 2005
70
GB
Can any one please give the the advantages disadvantages or reasons why BGP would be on an access router with only 6 clients that has one 64k connection into the core network?
 
I thought BGP was only really used if you had a reason to populate the routing table in the router with IP addresses from the Internet, like a LOT!!!

Burt
 
Perhaps if the core network ran iBGP. (heaven forbid) But, even then, I don't see the use as a static route probably would have worked just as well. Yes, it would know if a route went down which may save some time, but it seems like overkill.
 
alot of telcos have standard configs and bandwidth may not be taken in to account..
if you have one point of entry into the core then no matter what size link you have a default route would do the trick..

over a 64k link i would especially want to stay away from a routing protocol because of the amount of bandwidth that could be taken by the routing protocol itself due to updates etc.

i would question it...
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top