Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Beep Second Call 1

Status
Not open for further replies.

RonnieDio1

Technical User
Nov 21, 2011
85
BR
Hi

Hipath 4000 interconnected with Asterisk via STMI does not bip the second call on extensions. What can it be ?

Thanks
 
On a normal 4000 you need to give end users the KNOVR (Knocking/Override) key.
They need to turn on the feature which allows 'second call'
The LED will light up when the second call feature is activated.

Also then they would need the SPLIT (Toggle between calls) button normally placed underneath the KNOVR button.
The feature KNOVR should also be available from the menu on a display phone.

 
I have never tried it on analog extensions, indeed if an end user needs anything more than a basic in/out phone I normally give them a digital phone.
Try adding CW (Call Waiting) into the COS of the Analog phone.
Set it up on an external call then call it again to see, you might need the code from WABE for SPLIT

On V8 systems you can
ADD-ACTDA:STN,XXXX,CWT;
or
DEL-ACTDA:STN,XXXX,CWT;

To activate or deactivate call waiting.


 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top