Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

BCM50 VoIP Trunk - Inbound Call Ring to 2 Locations

Status
Not open for further replies.

DataGuy007

IS-IT--Management
Jan 10, 2008
1
US
I know this question has been asked in the past, but has anyone found a way to receive a call at site A (BCM 50) and have it ring at site A and also ring at site B (BCM 50) across VoIP trunks? Both sites are BCM 50 version 3.0 with UDP, we can transfer calls across. Any help would be great!
 
This is most likely not the answer your looking for but I thought I'd throw it out there.
Put voip sets in and register it to the same bcm. Then set a target line as app and ring on both sets. Theres no other way you can do it. Answer Dn's wouldn't even work.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top