BCM50 USING CALLPILOT 100/150

[sammy07]

Can you use a Callpilot 100/150 with the BCM50 or do you have to use the in skin one. Customer wants to save a little$$$.

Thanks

 

[stsguy]

why. the call pilot is built in to the bcm50.

WORK SMART NOT HARD

 

[sammy07]

It only came with 1 vmail seat and would like to save the money not to buy keycodes. It should work if its using digital station correct?

 

[pccal]

no

 

[DigitelD]

You cannot turn the embedded Callpilot in the BCM50 off.

SHK Certified (School of Hard Knocks)
NCSS, ATSP/IP

 

[curlycord]

Go into Services and look for call pilot near the bottom and disable the service, then hookup the Call Pilot.

Lets us know if works.


=----(((((((((()----=
curlycord

http://www.curlycord.com

 

[DigitelD]

I know you can disable the service but I am curious how this will work.

SHK Certified (School of Hard Knocks)
NCSS, ATSP/IP

 

[cook1082]

On a reboot of the BCM the service will come back on. Plus the feature codes?

 

[Phonehed]

Heh heh, this should be interesting.

Even though this is not the BCM forum, be sure to let us know what happens if you try that Sammy because I think it's safe to say that we're ALL ears on this one!

If you do get it to work, you might wanna try powering everything down for a minute or so, as if to simulate a power interruption, and then do a simultaneous reboot of both systems followed by a bunch of test calls before you sign off on it.

Phonehed in Dallas