Mar 27, 2009 #1 penroy MIS Feb 12, 2006 116 JM Is there a way to replace a BCM50 main board and is there a replacement part.
Mar 27, 2009 #2 Dasheen Programmer Oct 5, 2007 1,633 CA I believe u need to replace the whole system. Upvote 0 Downvote
Mar 29, 2009 #3 DBrewsky Vendor Jan 23, 2006 1,381 US Let's ask this.. Why would you want to replace the main board? --DB Upvote 0 Downvote
Mar 31, 2009 Thread starter #4 penroy MIS Feb 12, 2006 116 JM The system will not power up. Upvote 0 Downvote
Mar 31, 2009 #5 pccal Technical User Jan 10, 2008 360 CA I would start with the hard drive. Upvote 0 Downvote
Mar 31, 2009 #6 DBrewsky Vendor Jan 23, 2006 1,381 US If you don't get any lights, have you thought about having the power supply cable tested? Upvote 0 Downvote
Mar 31, 2009 Thread starter #7 penroy MIS Feb 12, 2006 116 JM Both power supply and hard disk are working.When I the power cable into the unit a green light that comes on and then goes out. Upvote 0 Downvote
Both power supply and hard disk are working.When I the power cable into the unit a green light that comes on and then goes out.