BCM50 SRG RESETTING

[tsbtas]

Can an BCM50 purchased from Nortel as an SRG (IE It wasnt a BCM 50 that was upgraded) be converted to a BCM 50 with a level 2 reset.

 

[cook1082]

It should be able to but in the KRS it is seen as a SRG and to generate any codes the SRG key would have to be removed.

 

[danthephoneman]

Once you have changed a BCM 50 to an SRG, there is no way of putting it back to a bcm 50.

 

[kungfumstr]

you will need to reset the system to factory default settings (refer to NTP for steps) and remove the SRG keycode as mentioned by cook.

 

[Crash101]

Once you go SRG there's no going back.

 

[Deweyhumbolt]

Who's right, dan/Crash or cook/kung?

 

[tsbtas]

OK, after much deliberation here is the answer;

A BCM50 that is a factory SRG or has been upgraded to an SRG CAN be set back to a BCM50. A level 2 reset put the system back to a BCM50. New keycodes then have to be applied to have BCM funtionality. Thanks for all of your help.