Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

BCM50 - Reconfigure URGENT PLS HELP! 1

Status
Not open for further replies.

robweston4563

Technical User
Mar 31, 2013
24
GB
Hi

New to this so forgive any errors in posting!

My business has purchased a second hand BCM50, to upgrade from our old Nortel 0x32.

I'm having a few problems.

Is there a way of restoring the system and all it's programming, to defaults, without - loosing all the keycodes that are installed?
I bought a DSM32 to add to the system, and was told i would not need any key codes to make this work, however some extensions says Keycode Required.
there are a number of Voip lines that were configured on the system, how do I remove these lines?
Please, if you can help, please come back to me as soon as possible.

Thanks in advance.
 
I know what i'm doing, i just asked for some advice. I will hit you all up again once ive had this line code sorted out.
 
can anyone advise me where i can get an upgrade code from Release 1 upwards?
 
ok. thanks for all your help :)
we are getting somewhere!

one last, important question. does every system have the POE- power over ethernet ability, or is that another extra, and how would i find that on the system?

Rob
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top