Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

BCM50 R6 - Looking for keycode part #

Status
Not open for further replies.

TheDurango

IS-IT--Management
Nov 13, 2011
3
CA
Good Day:
I have a BCM50 R6 with ip client, however I need the remote worker keycode.
I have called my distributer and they cannot find it.

I have the ip phone all setup, connects to office and shows the lines and correct ectension, in the BCM it shows online, ports are opened, but no voice or dial tone.

I assume that i need that remote worker enabled.

Any info would be great.

Thx
 
I show NTKC1248 For the paper copy of the auth code. It could be the 49 is the digital copy? Looks like around 300$ for paper copy. Might verify with your vendor what works best for you.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top