BCM50 R6 - Looking for keycode part #

[TheDurango]

Good Day:
I have a BCM50 R6 with ip client, however I need the remote worker keycode.
I have called my distributer and they cannot find it.

I have the ip phone all setup, connects to office and shows the lines and correct ectension, in the BCM it shows online, ports are opened, but no voice or dial tone.

I assume that i need that remote worker enabled.

Any info would be great.

Thx

 

[Firebird Scrambler]

Try this link below.

http://www.exteradirect.co.uk/produ...working-electronic-authorisation-licence/439/

I think the Item code is NTKC1249

All the best

Firebird Scrambler
Meridian 1 / Succession and BCM / Norstar Programmer in the UK

http://www.linkedin.com/in/davidbromley

If it's working, then leave it alone!.

 

[TheDurango]

Thank You.

 

[hunter81]

I show NTKC1248 For the paper copy of the auth code. It could be the 49 is the digital copy? Looks like around 300$ for paper copy. Might verify with your vendor what works best for you.