BCM50 R3 Acronis image

[Igman1969]

I am trying to image HD BCM50 R3 using acronis software.
I was able to image BCM450R5, BCM450R6, BCM50R5, BCM50R6 using the same hardware and software setup. R3 is giving me problems. Did anyone have luck with this?

 

[curlycord]

Might be a bad HD, try another R3.


=----(((((((((()----=
curlycord

http://www.curlycord.com

 

[Igman1969]

It is not HD.I used same drive to create other release. It looks like image downloaded is bad. Did you ever do BCM50 R3 image?

 

[Firebird Scrambler]

I've done a BCM 50 release 1, 2 and 3 via Acronis OK. Did you have the sector by Sector option ticked?.

All the best

Firebird Scrambler
Meridian 1 / Succession and BCM / Norstar Programmer in the UK

http://www.linkedin.com/in/davidbromley

If it's working, then leave it alone!.

 

[curlycord]

It is not HD.I used same drive to create other release."

I mean the R3 HD maybe bad that you are trying to copy.

Otherwise no issue when I did it.

=----(((((((((()----=
curlycord

http://www.curlycord.com

 

[pkellow]

I used Acronis 2011 True Image Home to recover 50r1, 50r2, 50r5, 50r6 to HDDs okay (to do a low level recovery). I did have a problem always with 50r3 with different HDDs which were okay. I raised a ticket with Avaya (101005-12329) who also tried it, and they also had the same problem. They issued me 7 files, which I managed to recover. They are in the process of verifying it, before releasing it General Available. Perhaps some issue with compatibility with Acronis??

Avaya's Work Item reference is wi00817134 (the new reference is instead of CR (change request)).

regards
paul

 

[pkellow]

I don't know if you can afford to wait before they post it. If not, I'm not sure how to get these 7 files to you. Unless u are in UK?

 

[Igman1969]

Thanks Paul,
I will try to contact Avaya to see if I can obtain these files.

 

[morenot]

Hi:

I had this experience:
I had a failed BCM50 R.2 (Rel 1 upgrade to R2) by power outage.
I tried to factory default by reset level 2 unsuccesfully (I got flashing red).
I download BCM 50 rel 1 Imagen from Nortel Page and then I tried to load to HD by Acronis 2010 unsuccesfully.
(when I finished Acronis procedure I saw red mark in schedule task).
Then download BCM 50 Rel 2 imagen, and whit this version I saw green mark, and I can get back to live the BCM 50.
I used the same HD.

So, the HD must have the same version as Imagen.

Saludos...

JLMT//

 

[pkellow]

pttech, if you need any references within Avaya let me know. I have the CSR and CR if this will help. Just need to dig them out.

the 50r2 image is not the same as 50r3. Morenot, your previous comment suggested you had a 50r2 originally, and restored a 50r2 from the tib file. This just took you back to 50r2, where pttech has a problem with 50r3 (as did I).

 

[TechInter]

when I download the BCM50 R5 image, the part 2 and 3, I'm not able to unzip the file, I receive error from 7-Zip that the file is broken. With the part 1, no problem. And it's same think with the R6 image, problem to unzip the part 2.

Any idea ?

 

[TechInter]

I found my problem, should take all the files and unzip them at the same time !

 

[pkellow]

for 50r3:

FTP Server: ftp.avaya.com
Username: smbFTP
Password: 55ttRGHJ
Location: /incoming/guests/smbFTP/Design_Fileshare/Cagatay/BCM50_R3_Image

 

[datamobile]

Hi Mr pkellow.. do you know where this file image is ,it seem the FTP below is empty ... if u know the newer location , i need 50r1

thank a lot !
Yvan


FTP Server: ftp.avaya.com
Username: smbFTP
Password:55ttRGHJ
Location: /incoming/guests/smbFTP/Design_Fileshare/Cagatay/BCM50_R3_Image