BCM50 problem cannot control router anymore

[codrutmgt]

Hello,
We have a Nortel BCM50 that had a hdd crash.
Well, after restore, we do not have anymore the router configuration site.
(When I access the site I got only "Apache 2 Test Page powered by CentOS")

The problem is that we still have the DHCP started, and that messes up our network.

Is there any (other) way that we can stop the DHCP service for the BCM50 ?
Thank you a lot,
Codrut

 

[norstarboy125]

Is this a basic BCM 50 or one with a built in router E or A model? And yes you can turn dhcp off.

Jeremy J. Carter
Charm City Communications

http://www.charmcitycommunications.com

Norstar. BCM. CS1000 Programmer

 

[codrutmgt]

Yes, it is an E model.
We used to control the DHCP via the browser from the Router WEBGUI tool.
As you probably understood, after the HDD crash and restore, the site does not work anymore.

https://192.168.0.222/router/

only shows "Apache 2 Test Page powered by CentOS"

So, if you understood the problem, can you tell me what should I do ?
Regards,
Codrut