The SSD in our BCM50 R6 appeared to have died, so I re-installed the original spindle drive and ordered another identical Corsair Force LS SSD. The issues I am having now:
- The BCM only partially works: 7316 sets don't work, only the 7316E sets, and SOME of the 7208 sets work;
- None of the sets that were connected to the 8x16 Expansion module work;
- I cannot connect to the system through Element Manager, either via the OAM port or the LAN, (but I can get in via set programming).
And, kind of related to these issues:
- Even with the latest version of Acronis, I could not clone the new SSD - is there something different in the new SSD?
Can this be brought back to full functionality, or is it time to look for another system?
TIA!
Bill
- The BCM only partially works: 7316 sets don't work, only the 7316E sets, and SOME of the 7208 sets work;
- None of the sets that were connected to the 8x16 Expansion module work;
- I cannot connect to the system through Element Manager, either via the OAM port or the LAN, (but I can get in via set programming).
And, kind of related to these issues:
- Even with the latest version of Acronis, I could not clone the new SSD - is there something different in the new SSD?
Can this be brought back to full functionality, or is it time to look for another system?
TIA!
Bill