Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

BCM50 expansion module?

Status
Not open for further replies.

Trebor18

MIS
Apr 3, 2014
47
US
I currently have a BCM 50 and the existing expansion module just went out. When i get a new expansion module do i need to get an ip license for the new expansion module?
thanks
 
I would think the BCM is already licensed for expansion module, no new licenses needed.
 
Correct.
Just power down the expansion cabinet then replace the MBM module, if still an issue then try another data cord between the 2 cabinets or replace the expansion cabinet.
Not that you must (or make sure) enable the MBM in Resources and have a set plugged into one of its ports.

________________________________________
We take the time to try to answer your questions for free, please return the favor and take the time to answer back and include any resolution you found elsewhere, thanks.

=----(((((((((()----=

small-logo-sig.png

Toronto Canada
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top