bcm50 door entry

[JustinHay]

Hello

We have a bm50 phone system and a door entry phone with a BT decal on it.

I have called bt business, the isdn peeps and the bcm50 helpdesk and no one can tell me how to change the door code.

Help please!

 

[curlycord]

Door codes default 6) are controlled by the D.O.C. - Door Opening Controller via it's dip switches.
This is a separate device on the wall.

Download the DOC Guide here


________________________________________

Add me to LinkedIN

**New Allworx Forum**

=----(((((((((()----=

http://www.curlycord.com

Toronto, CAN

 

[JustinHay]

Lovely, thanks. Do you mean its inside the cover of the code entry box .. or connected to it somehow ..

 

[curlycord]

Yes
The DOC is on the wall, the dip switches are inside.
Unscrew the one screw on the front.

________________________________________

Add me to LinkedIN

**New Allworx Forum**

=----(((((((((()----=

http://www.curlycord.com

Toronto, CAN

 

[JustinHay]

cool. looks like tiny alun/grub screw underneath. i'll bring in a presc driver set tomorrow to get at it. in the meantime is it worth me putting a pic of the unit in here ? to make sure we're talking about the same beast?

 

[curlycord]

Yes because what you describe makes no sense....but you are English!
LOL

Just google/images Norstar DOC, first few images show small square grey box.

It might be possible you have a 3rd party Door Phone that uses a Trunk port and has it's own controller.


________________________________________

Add me to LinkedIN

**New Allworx Forum**

=----(((((((((()----=

http://www.curlycord.com

Toronto, CAN

 

[JustinHay]

looks nothing like anything on the first 3 pages of images in a google search for that.

its a BT device as I say. Possibly rebadged(?)

 

[curlycord]

Well at first I thought is was a BST Door phone with their logo.

That is the Door Phone itself and not the controller.

Normal wiring setup:
KSU/BCM 1 pair to Controller - (both in phone room)
Controller 2 pairs (24 volt and signal) to Door Phone
Door Phone 1pair (24 volts) to Door Strike


BST Door Phone uses digital signal just like a phone set

Analog Door Phone uses a Trunk or Analog port.

The Controller might be built in to the Analog Door Phone

Best to get the part number somehow, I tried to search via image but your picture turned up with a rainbow right smack in the middle so 1 couldn't do that.

Firebird might drop by soon whom is familiar and worked for BT, perhaps he knows this particular one, seems BT made a few.




________________________________________

Add me to LinkedIN

**New Allworx Forum**

=----(((((((((()----=

http://www.curlycord.com

Toronto, CAN

 

[JustinHay]

I did an image search with the original photo . returned "pancode"

example:

https://www.google.com/url?sa=i&rct...wFtHBE3TLQzPS_WDm8BncNCA&ust=1485451387101781

so maybe its a bt rebadge(?) when i get the cover off tomorrow i may be able to see if there is a part code somewhere


I can see it as analogue in the bcm50 software

 

[curlycord]

I found same model on another site using the strain my eyes out on every image method...but finally led me to this guide which hope it helps.:

http://boxit.activecommunications.nl/Downloads/Doorintercom/Door_rel5_ITS4.pdf

Don't worry about the cover removal.




________________________________________

Add me to LinkedIN

**New Allworx Forum**

=----(((((((((()----=

http://www.curlycord.com

Toronto, CAN

 

[JustinHay]

Funnily enough I found that guide also Thanks for all your help guys, much appreciated...

 

[JustinHay]

sorted! thanks again for all your help peeps!