Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

BCM50 b - physical ISDN 3x MSN

Status
Not open for further replies.

fernsprecher

Technical User
Feb 3, 2016
13
DE
Good Morning,
I am a German private Member and have my first question to my private BCM50b V3. I have a physical ISDN line with 3 MSN. Where do I have in the Business Element Manager app? I currently have 3 IP participants (DN 301-303).

For now, thank you very much!
 
My connection from the provider 1x BRI (point to multipoint) with 3x MSN (Multiple Subscriber Number). Thank you ;-)

My numbers:
- 9xx946
- 1xx5093
- 1xx2325
 
you need to program target lines one per MSN number and then assign them to your sets.
Nikos
 
Good morning Nikos ,

thank you for your feedback. Can you tell me the function of the key is?

Should not the MSN in the lines " 061 + 062 " configured ?

Another question : Is there a central telephone book ?

Thanks and greetings from Germany

PS: Sorry, my English is not good [bigglasses]
 
No the MSS should be configured in the reveiced number of the target lines. You will find them in lines section in Element Manager.
Central directory is the speed dial list in general settings.

Nikos
 
Thank you . Where do I have the three MSN Add eim BEM ?
Line_oplt2i.jpg
 
You need to go to target lines in configuration-telephony-lines and there you will be able to assign the numbers. first target line is number 125 you can use this , 126 for your second number and 127 for your third number.
Then each target line has to be assigned to a DN depending where you want the lines to ring.

regards

Nikos
 
Hello Nikos ,

I've created the following under " Target Lines " :

Target Lines | Pub.Receives | AssagnedDN
Line125 946 (98xx946) 301 (only Ring)
Line126 093 (16xx093) 301, 302, 303 (only Ring)
Line127 971 (28xxx971) 303 (only Ring)

The DN under Line 061 + 062 I have deleted .

If I now call on the numbers , it does not ring .
 
Are those DDI numbers?
They dont seem to match your 2nd post.
You added in 946 083 and 971?

Very strange DDI numbers.....starting with 9 or 0 as well?



________________________________________
We take the time to try to answer your questions for free, please return the favor and take the time to answer back and include any resolution you found elsewhere, thanks.

=----(((((((((()----=

small-logo-sig.png

Toronto Canada
 
No DID number !
I have MSN-Numbers . I have the following numbers :
[ul]
[li]98xx946[/li]
[li]16xx093[/li]
[li]286xx971[/li]
[/ul]
xx = anonymous
( In my 2nd Poast I have confused the numbers . )
 
Don't forget to set the actual lines from Manual to Auto answer.

Auto answer will allow the system to detect the receive digits and then rout the call according to the incoming number.

Also set the public receive digits lenght to match the carrier.
 
OK works. Thank you!
Since the Target Lines is active, no longer works the fax of the Fritz! Box 7272nd This is connected before the BCM50 at the BRI. The faxnumber is: ... 25

Aktive_Set_lfresw.jpg


Target_Line_fcuhev.jpg


Line_chvq2k.jpg


TelephonyResource_du7blh.jpg


DialingPlam_askjft.jpg
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top