Hi
I normally work CS1k but was sent to a BCM450.
It has a Fiber expansion card in slot 3 of the main unit. (No expmansion)
There are 5 digital SM and 2 ASM. The 2 ASM are connected to port 6 on the FEM
The fiber from port 6 goes to the first ASM and then it is daisy chained to the second ASM.
The ASM has been working but as of 2 days ago it stopped.
I have rebooted the ASM's, and also rebooted the BCM450.
In the module status it just says" enabling" but does not come up.
Any ideas?
I normally work CS1k but was sent to a BCM450.
It has a Fiber expansion card in slot 3 of the main unit. (No expmansion)
There are 5 digital SM and 2 ASM. The 2 ASM are connected to port 6 on the FEM
The fiber from port 6 goes to the first ASM and then it is daisy chained to the second ASM.
The ASM has been working but as of 2 days ago it stopped.
I have rebooted the ASM's, and also rebooted the BCM450.
In the module status it just says" enabling" but does not come up.
Any ideas?
