BCM450 - Server Errors ( no ports lefts)

[Suha1982]

Hi ...

I have facing an issue with the BCM450, after connecting 30 IP deskphones (less than the 50 IP sets as per the license) the server started generating (no ports left) message and some of the phones can’t be logged in anymore.

How can solve this ?

Thanks

 

[telcodog]

Go to Resources>Application Resources>IP Sets and see what your system MAX is set to. Make sure that MAX is in there under the Maximum column. If it isn't, modify it so it is. You might have to reboot the system to effect the change. That's likely the problem as long as you're correct about the number of licenses you have and how many IP sets are online.

And of course, make sure your system is up to date on patches.

 

[Firebird Scrambler]

Also make sure that any 2050 softphones that you might have are deregistered, if they are no longer needed.

All the best

Firebird Scrambler
Meridian 1 / Succession and BCM / Norstar Programmer in the UK

http://www.linkedin.com/in/davidbromley

If it's working, then leave it alone!.

 

[cook1082]

Under resoures my shure there are enough DN's avaliable for the IP sets.