I just installed a BCM450 Rls 6.0 with 2 PRI's. I need to toll restrict one analog station from LD calls. Can't seem to get any restrictions to work. I have only installed a few PRI's and never had to restrict any stations. I have set up many MICS and CICS restrictions with POTS lines. But same method doesn't seem to work on this BCM450 with PRI's. I am using filter 01 in normal mode. Callers have to dial 9 to make calls. Any ideas?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
BCM450 Rls 6.0 Toll Restriction
- Thread starter teltek1
- Start date
norstarboy125
Vendor
Same method works no matter what system.
Build a filter with restrictions.
Apply filter to the set.
Jeremy J. Carter
Charm City Communications
Avaya/Nortel
Sales. Service. Installation
Build a filter with restrictions.
Apply filter to the set.
Jeremy J. Carter
Charm City Communications
Avaya/Nortel
Sales. Service. Installation
- Status
Similar threads
- Locked
- Question
- Locked
- Question