BCM450 Rls 5.0 Contact Center routing via Area code

[CRIMobile]

Does the BCM450 Rls 5.0 Intelligent Contact Center have the ability to route inbound callers to a PRI to a specific skill set based on the callers Area code? If so is this a basic feature or does it require a keycode? Anybody used it before, does it work good or does it have gotchas?
Thanks,

 

[gberger]

No keycodes needed, look in Call Pilot under CLID routing.
Works good.

 

[CRIMobile]

Thanks for the info. Happy 4th!!!