Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations biv343 on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

BCM450 R6 SIP invite messages

Status
Not open for further replies.

ECartman

Vendor
Jan 22, 2011
260
IE
Hi Guys,

Have a BCM450 R6 with SIP Trunks. The carrier is rejecting the first invite message as unauthorized as the BCM is not sending the credentials in the first invite. When the carrier rejects the first invite, the BCM sends a second invite with the neccessary credentials and call processes correctly.

I want the BCM to send credentials in the first invite to eliminate the initial rejections.

Anyone come across this or have any ideas ?

There will be stars :)
 
Since 6.0 has a built in capture utility, you can capture a setup and see if the BCM is or isn't sending the information.
I suspect the BCM is sending the proper credentials with both invites and the carrier is just rejecting the first one.

-SD-
 
Hey SD,

I have reviewed the traces and it doesn't seem to be sending them.

I can post the traces if you would like to take a peak ?
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top