Working on a BCM450 R6. It has 20 IP sets on it and trying to replace 20 more digital with ip. Keycode applied ok. I changed the extension number on a digital set. When I try to add this set as an IP, I get "invalid DN". Ip set range is set to 100 sets, including the one I am trying to use. I have tried this with 3 other sets, all with the same result. Any thoughts as to why this is happening.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
BCM450 "Invalid DN"
- Thread starter jlk53
- Start date
Splic3d
Vendor
- Dec 28, 2012
- 499
Open up the Active and Inactive DN's and see where the old DN ended up. Are the ip sets using a range of DN's even though they are not registered yet?
If its not working, get a bigger hammer!
Avaya/Nortel/NEC/Asterisk/Access Control/CCTV/DSX/Acti/UCx
If its not working, get a bigger hammer!
Avaya/Nortel/NEC/Asterisk/Access Control/CCTV/DSX/Acti/UCx
- Thread starter
- #4
- Status
Similar threads
- Locked
- Question
- Locked
- Question