OldNortellian
Vendor
Customer has a PRI that is constantly failing, so they are changing carriers. Is there anyway to have the new circuit as the primary, and if it fails, switch to either the other PRI or POTS lines?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
BCM450 question
- Thread starter OldNortellian
- Start date
- Status
Dataprobe RSS. (Redundant switching system) (Intelligent Cross-connect)
There are others as well. Be careful, they disapear...Microdacs, Syncrotel Pathmaster, etc.
The BCM can be programmed to allow routing for PRI failure/overflow to CO.
PRI's can also be configured to switch redirect on failure to redirect inbound calls to CO lines.
Problem for me - Why anyone would pay a carrier for a PRI that is "constantly failing"?
KE407122
"The phone was working fine before it knocked over my coffee.
There are others as well. Be careful, they disapear...Microdacs, Syncrotel Pathmaster, etc.
The BCM can be programmed to allow routing for PRI failure/overflow to CO.
PRI's can also be configured to switch redirect on failure to redirect inbound calls to CO lines.
Problem for me - Why anyone would pay a carrier for a PRI that is "constantly failing"?
KE407122
"The phone was working fine before it knocked over my coffee.
- Thread starter
- #3
Within a contract, there is still an implied good faith covenant of mutual benefit for both parties. "You pay and we won't beat you." can be termed mutually beneficial however it is extortion.
KE407122
"The phone was working fine before it knocked over my coffee.
- Status
Similar threads
- Locked
- Question
