I confirmed I have a Multi-Image drive. On a BCM450, when I install and boot from the Multi-Image drive I get the following menu;
Quick Configuration
===================
0 - Exit
1 - Reboot into Main OS
2 - Shutdown
3 - Reboot into Safe OS
4 - Transition to Main OS
5 - Configuration Reset
6 - Software Reset
The Power LED is solid Green and the Status LED is solid yellow.
Why don't I get the Multi-Image Quick Configuration Menu?
Quick Configuration
===================
0 - Exit
1 - Reboot into Main OS
2 - Shutdown
3 - Reboot into Safe OS
4 - Transition to Main OS
5 - Configuration Reset
6 - Software Reset
The Power LED is solid Green and the Status LED is solid yellow.
Why don't I get the Multi-Image Quick Configuration Menu?