Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

BCM450 loosing programing on target lines

Status
Not open for further replies.

chrisag

Programmer
Sep 12, 2012
190
CY
Hi all
I have a BCM450 which is making a strange problem
I program tarket lines for the extensions they work and then it just stop to work.
To solve this I have to clear the tarket line and reprogram the incoming number to a different tarket line.
But this keeps happening randomly to different extensions and number of tarket lines.
What do you think the disk maybe?
 
You need to start looking at the alarm section to see if anything odd has been happening.

You need to find out if you has do a full backup OK, check the BCM 450 patching levels in case an update was done to solve your problem. The 450 came in 3 versions, 1.0, 5.0 and 6.0.

Please post back your system details.

Firebird Scrambler

Nortel & Avaya Meridian 1 / Succession & BCM / Norstar Programmer

Website = linkedin
 
Did you reboot system yet?

________________________________________

Add me to LinkedIN

**New Allworx Forum**

small-logo-sig.png

=----(((((((((()----=
Toronto, CAN
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top