BCM450 IP set issue with Ports

[nooop]

I have 99 IP seats licensed, and we ran out of ports. I don't see any overlapping ports from digital etc. How can I reset the port range? I am considering the application DN reconfiguration? We need to have all 99 sets online. I have done a cold reset, and by default it has only 15 ports. I expanded the DN range in telephony resources IP Sets and got around 50 to register, but now i have no ports left?

Thanks

 

[snowman50]

Is this a Basic unit (100 extns)or Does it Have a CeC card to take it up to 300 extns

The main unit of the BCM450 system supports 100 phone stations, 48 trunks
(with the exception of E1 trunks which support two DTM media Bay Modules
providing a total of 60 E1 trunks), 2 fax ports, 300 Unified Messaging Seats
and 64 conference ports.
When installed, the Capacity Expansion Card (CEC) increases the media
processing capacity on the BCM450 so that it can support up to 300 stations
and 130 trunks. It also provides an increase in the BCM’s application capacity.