BCM450 Insufficient Resources

[lewmar]

Hi,
I have BCM450 with Capacity Expansion Card installed and Expansion Port License activated. Configuration requires 8 DSM32+ and 2 DTM modules. When I’m trying to configure 5th and 6th module in the expansion cabinet I get “Insufficient System Resources” message. Regardless if I configure one or four modules in the main cabinet I still have problem with the 5th and 6th module in the expansion cabinet, first 4 modules in the expansion cabinet configure OK. Does somebody know where might be a problem? I have the same problem with newest patches installed and without them. All equipment is brand new.
Thank you for your help.

 

[tech1979]

Have you confirmed that the system sees the CEC? By clicking the Admin tab, General, then Hardware Inventory. You will see somewhere in the middle of the screen where it lists the card.

 

[lewmar]

Yes, system sees the CEC card.