Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

BCM450 Dn's

Status
Not open for further replies.

joezzz

Technical User
Feb 9, 2007
135
DM
some help please,

how do i get a BCM to show more than 200 DN's in All Dn's tab under telephony---sets---all dn's.

I want to setup a bcm 450 that has more than 200 DN's, the ranges I would like to use on this one BCM are as follows ..

3100-3199

3200-3299

4100-4199

please help
 
Do you have physical capacity for that many phones--do you have DSM32+ Media Bay Modules installed for that quantity, or do you have your Telephony Resources set for that number of IP phones?

I'm thinking it will only show the number of DN's that match your configured capacity.
 
You can change the Dn's to what you want them to be as long as there is not conflict with numbers,App DN's,Huntgroup DN's etc..
But just to see more you need the expansion card.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top