BCM450 - Can't receive calls from all locations

[docit]

]The goal is to use our 4 digit internal exentions to access a new location from 3 current sites. The new location"Z" has been setup using the BCM450 to one of the other sites "A". Incoming and outcoming calls are functional between "A", "B", and "C". We can make outgoing calls from "Z" to all sites, but can only receive incoming internal calls from "A". When Sites "B" and "C" try to reach "Z" the phone goes immediately to the receptionist at "A". Although I got this far and I am a newbie. Any advice would be appreciated.

[ul]
[li]Systems: BMC450 Version 6.0 at Sites "A", "B","C"[/li]
[li]Working pingable VPN Connections between all 4 sites.[/li]
[li]Site A is the Server for "Z"[/li]
[/ul]

Betwen Z and other sites
Z----IP1230 phone (192.168.20.101) ===>Firewall/VPN "Z"====>Inernet=====>Firewall/VPN "A" =====> BCM450/Server "A" Phone subnet(192.168.50.0) "Z" registers as 192.168.20.101
Z=====================================>Firewall/VPN "Z"====>Inernet=====>Firewall/VPN "B" =====> Phone subnet(192.168.60.0)
Z=====================================>Firewall/VPN "Z"====>Inernet=====>Firewall/VPN "C" =====> Phone subnet(192.168.70.0)
Between other sites(not all interations)
C==================Phone subnet(192.168.70.0)==================>Firewall/VPN "A"====>Inernet=====>Firewall/VPN "A" =====> Phone subnet(192.168.50.0)
B==================Phone subnet(192.168.60.0)==================>Firewall/VPN "B"====>Inernet=====>Firewall/VPN "C" =====> Phone subnet(192.168.70.0)

 

[phoneguy610]

Do you have any networking keycodes?

Programming done for the networking?


ddcommllc.com
Avaya/Toshiba/SyntelSolutions

ACIS

"Will work for stars

 

[docit]

Yes. I actuall got it to work by setting up routing in the local Pbx at each location. Thanks for responding(phoneguy610)