BCM450 - ASM8+ won't enable twist

[sparky9868]

thread1361-1533899

Hi, I used this the above thread to finally get one of 3 ASM8+ to enable on a 450 with latest patches. Had to use the hot in/out to get it to work! System did a hickup and reset in 5-8 secs. This all happened around 9:30 PM. This morning at 6:54AM log show an attempt and failed MBM update and then the system lost sync with the DTM, it said to reboot (carrier actually called to Notify as well) After I logged in and looked around I decided to reboot. System came back up but now ASM in the the perpetual Enabling.... mode again!

Any thoughts or reccommendations would be great.

 

[freefone]

I had a similar problem with ASM8+ on BCM450. I found only GASM8 will work with BCM450.

 

[Dasheen]

The cards f/w needs to be at least 2.02. Yours is probably 1.0.