BCM450 and Paging System

[EngMajdi82]

Hi ...

I have BCM45O Rls.6, customer have a amplifier system, How we can integrate BCM with this paging system to using page feature from phone over the amplifier.

Thanks

 

[allworxguy]

Paging output is on or/bk pair.

Marv ccna

http://www.telemarv.ca

Sales, Installation & Service for Norstar, BCM, Samsung & Allworx Serving Ottawa and Eastern Ontario since 1990

 

[allworxguy]

Sorry just noticed its a 450. There is a 1/8" jack on the front with picture of speaker.

Marv ccna

http://www.telemarv.ca

Sales, Installation & Service for Norstar, BCM, Samsung & Allworx Serving Ottawa and Eastern Ontario since 1990

 

[telcodog]

Black-Orange would be correct if it was a BCM50. Unfortunately, this is a 450 so the paging output is on the front of the Base Function Tray.

If you don't know how to deal with a paging amp, you really should call in a qualified tech because it's not just the BCM you have to deal with, you have to know the amp, whether it has some king of interface for connecting to a trunk or station port, whether it needs a relay contact open/closure to operate or mute music etc etc.

Not always as simple as it sounds.

 

[EngMajdi82]

Thank you all

last question, if we complete the connection between amp and BCM, what is additional configuration should be programm on BCM to acomplish this ?

Thanks

 

[jsaad]

Program an external page key Ftr 62 and enable paging access for the telephone under capabilities.

http://www.tgscorp.com