BCM450 & BCM400 ip issues

[foneguy20]

Have a BCM450 6.0 system connected to a BCM400 4.0 system via VoIP trunks
(H.323).

Site-to-site calling works fine with one exception...

Calls from the BCM400 to ALL extensions on 2 DSM32+ cards, both located in the BCM450 expansion cabinet (slots 2 & 5), are going to the reception station. Stations on those 32+ cards can call the bcm400 successfully.

Those same extensions can be called successfully internally within the 450.
It's only calls coming from the BCM400 that are hitting the reception phone.
All other stations on the other DSM32+ cards in the expansion cabinet, and main cabinet, can be called successfully from the BCM400.

Replaced one 32+ card with a new one and had same issue.

 

[cook1082]

They do have the Target lines assigned.
Move with set relo a phone on the 32 that dosen't get calls to the one that does. This will show if hardware or programming.