BCM450 6.0 Patch Question

[tecphonelady]

We need to do a BCM450 6.0 Upgrade and the instructions say:

Updates should be applied in the following order:
BCM450.R600.SU-2
BCM450.R600.IPTEL-7
BCM450.R600.CORE-TELEPHONY-12

We can't find any reference to the BCM450.R600.IPTEL-7 patch. Does it really exist?

Thank you!

Ann

http://www.PhoneLady.com

and

http://www.TelecomEx.com

 

[morenot]

That patch is into SU 3



Software Update Name: BCM450.R600.SU.System-003.201101

Applicable H/W Platforms: BCM450

Applicable S/W Platforms: 10.0

Category: GEN

Installation Recommendations:
This update should be applied to all new installations of BCM450 Release 6.0.
Existing installations should have this update applied if they are
experiencing any of the issues that are corrected. There is no need to
schedule specific maintenance to apply this upgrade if there are no
reported issues. In those cases, systems should be updated at the next
regular service opportunity.

Components and Versions:

core-telephony 6.1.1.05.26
cte 6.1.1.128
cti 52.0.136
dialogger 46.1.1.136
dsp-firmware 56.10.40.9.5
feps 6.1.13.148
gap 6.0.7
iptel-mrs 6.1.10.150
iptel-sas 6.1.4.126
iptelprovideragent 6.1.4.132
mgs 6.1.10.150
mps 6.1.10.150
mpsmi 6.1.10.151
utps 6.1.9.145
voicemail 60.1.3.132
webpage 6.0.65

Constituent Updates:
===================

New updates for this SU:
------------------------
BCM450.R600.IPTEL-11*
BCM450.R600.IPTEL-7*
BCM450.R600.UTPS-9*

* It has not been released as an 'atomic' patch


Updates from previous SU:
--------------------------
BCM450.R600 SU-2
BCM450.R600.CORE-TELEPHONY-1


Dependencies: BCM Release 6.0 version R6.0 1.02

Product Dependencies: None

Size: 47.34 MB


Size of changed content since last Smart Update:

System Impact:
Time to apply approximately 10 minutes

Does update application force reboot: Yes
Over last Cumulative Smart Update: Yes
Over default content: Yes

Other Impacts: All services will be unavailable during the update until the system reboot completes.

Limitations: None

Other Impacts: None

Update Removable: No


Description of the contents:
----------------------------

Software update BCM450.R600.IPTEL-11
------------------------------------

1. No speech path on a call from CS1K_IPset to BCM set that is set CFAC to CS1K_CallPilot.
Outbound SIP trunk does not respond to UPDATE when inbound trunk has not yet negotiated
SDP via 100rel.
wi00733826


Software update BCM450.R600.IPTEL-7
-----------------------------------


1. SIP Standard Caps Exchange broken in some tandem calls.
wi00729216

2. BCM sending SIP INVITE request to the IP address different than the one with
which it got registered successfully.
wi00828944

3. BCM fails to acknowledge the SIP Response if an outgoing call to SIP-T
customer is not answered and far end tries to clear the call with a 480
response.
WI00825476

4. BCM should not treat SDP version as old when session id has changed
wi00732195

5. Ringback tone is not heard for the majority of the calls when dialling out
via Public SIP trunks and breaking out to PSTN.
wi00822623

6. BCM ignores the port information of the Contact-URI and sends INVITE to the
wrong port after receiving 302 response.
BCMRELEASE-1078

7. Calls from Skype clients produce non-numeric CLID. FEPS does not handle
non-numeric CLID very well and encodes the non-digit characters as digits
into VDI message and passes to CoreTel.
BCMRELEASE-1089

8. BCM-sip-SM-CS1K-cfac-SM-OneX - 1 way speech from OneX to BCM
wi00774905

9. CS1K_1_IPSet calls SIP to BCM_2050 blind transfers to SM_client with no
speech path
wi00819523

10. Call resumed with no media if transferred party doesn't answer call
wi00829858

11. CS1000:SW:LineTrunk:SIPInterop
wi00784193

12. No voice path when making call from CS1K_AE_set to BCM_set configured CFAC to SM_client
then CS1K_AE_set holds/retrieves the call
wi00828742


Saludos..

JLMT//