BCM400

[sbn15]

Hope someone can help I just cant seem to get my dipswitch settings correct.
I'm adding a G4X16, what would be the best configuration for dipswitches with the following mbms
0 dsm32+ on Bus 2
1 gatm8 on Bus 7/0
2 gatm4 on Bus7/2
3 (g4X16 new)

any help would be appreciated thanks

 

[sbn15]

...and the current DS30 split is 2/6

 

[cook1082]

It would have to go on 3,that would be the trunks and the stations would be on 4. Set the switches for 3.

 

[sbn15]

OK, so you mean this...

bus 3/0
on on on on on off
lines 181-184

DS30
bus 04 for DN
253-268
(2.5 upgrade)
285-292
(3.0 new)

...and dosnt matter its install in the last position?