Hi!
Im having issue with my H323 set up between my two bcms.
The 50 has no problems calling the 400 to any extension on the 400, conversation can and all works fine. The problems is the with the 400, it cannot call my 50 at all. When I dial an extension that is my 50 it take an voip/h323 line and hang there for ever, and also in the bcm monitor it shows as connected, but I never get or got a busy signal or dial tone! Anyone got a clue.
So far I was told to restart the bcm400 with fresh 4.0 hd and reconfigure and see if the problems persist. There has to be another to do that than to reconfigure everything.
BTW Both bcm are on a public IP so there is nat/firewall issue that can be the cause!
Thanks for any help
Im having issue with my H323 set up between my two bcms.
The 50 has no problems calling the 400 to any extension on the 400, conversation can and all works fine. The problems is the with the 400, it cannot call my 50 at all. When I dial an extension that is my 50 it take an voip/h323 line and hang there for ever, and also in the bcm monitor it shows as connected, but I never get or got a busy signal or dial tone! Anyone got a clue.
So far I was told to restart the bcm400 with fresh 4.0 hd and reconfigure and see if the problems persist. There has to be another to do that than to reconfigure everything.
BTW Both bcm are on a public IP so there is nat/firewall issue that can be the cause!
Thanks for any help
