BCM400 Rls 4.0 and BCM450

[DBrewsky]

Where in Element Manager can I set the Ethernet port speed. Need to change it from Auto-Negotiate to Manual 100mb/FULL.


Thanks!

--DB

 

[Firebird Scrambler]

I wasn't aware that there were any settings in Element Manager for this?.

All the best

Firebird Scrambler
Meridian 1 / Succession and BCM / Norstar Programmer in the UK

http://www.linkedin.com/in/davidbromley

If it's working, then leave it alone!.

 

[curlycord]

Should be a setting of the OS only.

i.e. if you having issues with Windows and it's speed then change it's settings.

NetworkConnections/AdaptorProperties/Configure


=----(((((((((()----=
curlycord

http://www.curlycord.com

Toronto Canada

http://www.telcopc.ca

 

[daveyboy1977]

BCM200/400 Rls4 navigate to Resources>Network Interfaces, within the details of the LAN interface when highlighted, you will see the MAC address and the connection type, you can set the speed here. On the BCM450 this option was taken away and all the LAN settings moved to System>IP Sub System.

Thanks Dave.