Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

BCM400 IP Trunk Network with Centralized Voicemail

Status
Not open for further replies.

lm69739

Technical User
Feb 3, 2006
16
US
I have 5 BCM400's networked via IP trunks and Call Pilot at the host. The remote BCM extensions forward back to Call Pilot, play the greeting for appropriate mailbox and lights MW on correct extension at each remote, but when remote users access Call Pilot to retrieve messages, it does not recognize their extension. They must input ext#, and PW. Is this normal or am I missing something in the programming?
 
Have you configured a private OLI on the sets in question? That should do it for you.
 
I do have the private OLI set on all stations at each remote since original install, and no luck with it recognizing the user in CP.
 
Don't you need to have target lines configured at the host to correspond with the OLI at the other sites?

 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top