BCM400 and Door Phone

[SNSSMIS]

I have connected a Door Phone and a Controller to the BCM400. When the button is pressed it rings the DN programmed and the OPEN is displayed. Pressing OPEN or "6" does open the lock. Great!
I would like it to ring several phones at the same time not just 1 DN.
Any suggestions how to have the door phone ring 4 or more phones at the same time?
Thanks!

 

[dibthree]

Use a hunt group as your doorphone DN And then just add the phones to the Hunt Group.

 

[SNSSMIS]

I set up hunt groups and have it working.

What are the Ring Group directory numbers?

There are Ring Groups and can add DN but how do you call them?

 

[oldestgeek]

Ring groups don't have DNs and can't be dialed internally. They are associated with the ringing service modes and applied to lines. When a service mode is on for a particular line, the phones in it's ring group will ring when the line is called.

 

[dibthree]

yes like for example when setting up a night feature that rings a group of phones when Night Services is on.

 

[SNSSMIS]

Thank you for the response. Help me out big time.