Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

BCM400 3.7 Upgrade to 4.0 What is needed 1

Status
Not open for further replies.

Sparkie37

Programmer
Sep 26, 2007
62
CA
My customer currently has a BCM400 with 3.7 software and wants to upgrade to 4.0. At the same time they would like to replace their current hard drive. What software components will I require?
 
A keycode upgrade and CD-Roms for a start. You may have trouble obtaining them now or be forced to upgrade to a 450.
I use Acronis and have imaged a 3.7 and 4.0 onto a 20 Gig IDC dick without any problems.

This link might be useful to follow.




All the best

Firebird Scrambler
Meridian 1 / Succession and BCM / Norstar Programmer in the UK

If it's working, then leave it alone!.
 
Thanks mate. I realize - why stop at 4.0! It is the customer's decision - and they pay the bills.

JIM
 
The BCM is going to be killed off early next year, so I supposed it would be easier to stick with 4.0 unless you needed to use some of the newer features such as follow me etc.

I've taken a scout around today and it looks as if the keycode upgrade from 3.6/3.7 is going to be hard to obtain now?. I looked at a site in the UK and I'm unable to find any BCM upgrades.

All the best

Firebird Scrambler
Meridian 1 / Succession and BCM / Norstar Programmer in the UK

If it's working, then leave it alone!.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top