Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

BCM200 R4 patching 1

Status
Not open for further replies.

KjellH

Technical User
Feb 5, 2007
13
SE
I have a BCM200 R4. unpached system.
I want to patch it with the latest patches.
On Nortel web there is :
BCM.R400.SU.SYSTEM.018_BCM_4.0 and BCM.R400.SU.DESKTOP.013_BCM_4.0 .

Dependensies say that System has to be done befor Desktop.
In system there is a dependensy stating that:
BCM.R400.160-SoftwareManagement or later must be applied before this update.
The BCM.R400.160-SoftwareManagement is inside the systempatch. I cant find the 160 patch on Nortel web.

So the questiion is , Can I update the system directly with the System patch or do I need to first get the 160-SoftwareManagement.

Best Regards

 
start with the SU System. There will be a bax where you can make a choice which patch to apply. First patch with the software management. Then start the patch again and you'll see that the software management is already installed and you can pick the smart update.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top