leftbase2009
Technical User
Has anyone tried this? Does anyone have any docs as to the config?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
BCM to Cisco Call Manager Sip Trunk
- Thread starter leftbase2009
- Start date
- Status
SupportDude
Technical User
Haven't tried it with SIP, but I did it with H323 a few years ago.
Most of the problems were on the Call Manager side.
I would suspect SIP would be simpler, especially with the ease of config on BCM 6.0.
-SD-
Most of the problems were on the Call Manager side.
I would suspect SIP would be simpler, especially with the ease of config on BCM 6.0.
-SD-
check out avaya development web site to see if it's been through the developer program. If not you won't get support from avaya.
sip on bcm is a cut down feature set. I only have the sip features implemented for 50r3, however it is worth stressing sip on bcm did not include all sip functionality - don't know about 50r6/450r6 though.
sip on bcm is a cut down feature set. I only have the sip features implemented for 50r3, however it is worth stressing sip on bcm did not include all sip functionality - don't know about 50r6/450r6 though.
- Status
Similar threads
- Question
- Question
- Locked
- Question