BCM SIP VOIP CALLS

[joezzz]

Hello all,

I have an issue here ..I have a few BCM 450's and....an O61...and a few cs1000's ..I am trying to set up a new bcm 50 to the setup ..calls made to the DID numbers ex 785 2254 is routed via the 061 and terminates ok at the set with voice paths both ways working .However the calls originating from the BCM (t7208) will ring the phones on the CO's grid but will have no speech path when answered.All the codecs are setup the same way the other BCM 450's are setup and working.

what have I not looked at?

please help

 

[Dasheen]

Payload? Do they match?

 

[joezzz]

yes they do

 

[telcodog]

You haven't provided a whole lot of setup info but given you have voip trunks between all the sites, the likely culprit is a wrong default gateway somewhere or there is a routing problem between your subnets.

If you can give us some of the ip addresses we could probably be of more help.