BCM Hardware Information

[cmbcomm]

We are a consulting firm working on designing several electrical/telecommunication projects and in this process with have been asked to provide a complete physical layer design incorporating, among other equipment, a client supplied BCM 400. We are trying to provide as much detail as possible so we would appreciate if someone could direct us to a website that contains connection information for the BCM Hardware. In particular we are looking for wiring information on the following:
1. NTBU0975 - BCM 400 (DIGITAL TRUNK, 4X48X0X8 IP WITH VM40) BUNDLE
2. NTPW0119 - BCM EXPANSION UNIT UNIVERSAL PS
3. NT7B09AAAD - BCM 32 DIGITAL STATION DOUBLE DENSITY MEDIA BAY MODULE.
4. NT7B08AAAL - BCM 16 DIGITAL STATION DOUBLE DENSITY MEDIA BAY MODULE.
5. NT8B90AAAF - BCM ATA-2 ANALOG TERMINAL ADAPTER

We have tried Nortel's website but we weren't able to access the information with our guest login level.

Thank you in advance

 

[biv343]

The bundle has a Digital trunk card (t-1 interface), 32DSM, most likely 4x16 card.

I'm assuming you're wondering what type of cables/connectors you'll need. If I'm wrong, I apologize in advance.

1. DTM - RJ-45 plug (ethernet patch cord style)
2. 32 DSM, 16 DSM, 4x16 - Each will take a amphenol/CX cable (female). The 4x16 also has 4 RJ-11 jacks for connecting CO trunks.

So, you'll need a CAT-5 sytle straight through patch cord to connect the DTM to the smartjack, 6 CX cables, and up to 4 RJ-11 crimps/cables for the CO trunks. The ATA has two RJ-11 jacks - digital in, analog out. Standard telephone line cords for that.

Hope this is what you were looking for.

 

[cmbcomm]

Thank you for the information.