Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

BCM CONNECTED TO AN OPTION 11 C

Status
Not open for further replies.

VitelcomTech2

Programmer
Apr 26, 2010
4
VI
Good day,
I have this issue i am trying to figure out. I have a bcm 450 and an option 11 c connected together by a tie. There are no other resouces on the bcm . The option 11c has two switch t-1s . The issue i am having is that i can make local calls from the bcm through the tie to the option 11, I cannot seem to make long distance calls. On the option 11c side when trying to make a ld call you must put in a auth code.
 
It sounds as if the tie line has barred access for long distance calls. However, this depends on what typr of AUTH codes are being entered?. Are they the BCM auth codes or ones from the option 11 system?.

All the best

Firebird Scrambler
Meridian 1 / Succession and BCM / Norstar Programmer in the UK

If it's working, then leave it alone!.
 
Hey Fire Scrambler, I appreciate your response. The auth codes are coming from the option 11. I have everything unrestricted from the bcm 450 side.I can also make 800 calls too from the bcm 450. Just having problems with long distance.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top