BCM 50r6 (Avaya) warning logs GW type

[yankblan]

I get this a ton:

Endpoint type does not match configured RemoteGateway type.
callingDN=unknown, calledDN=426.
Unable to find settings for gateway type BCM36. Using defaults.

I have all my BCMs (3 addresses) set at GW type at BCM; BCM36 is no longer a possible selection; any idea where it comes from?

Never had this issue in r5 and older.

 

[Igman1969]

I think you are getting this since One of your BCM is 3.6 or 3.7. As per Nortel matrix BCM3.6 is not compatible with BCM50r6 and BCM450r6. You can still get private networking to work. This alarm will allways be there. One way I know to overcome this is to upgrade your 3.6 or 3.7 to release 4.0

 

[yankblan]

Sorry, should have mentionned: My 3 BCMs are 50 release 6; they were installed within the same week.

That's why I don't get where the 36 comes from, since it's no longer an option like in past versions