Wondering if any one has had issues with 323 trunking, I have a CS1k at one end and BCM50 at the other, BCM has 4 323 trunks pointing to CS1k and 2 analog trunks for local incoming with approx 15 tdm sets, recently I am getting the first call across 323 trunks working fine, next call there is dead air and some times no ringing on BCM from pbx, they are running on target lines and the one main target line rings on all sets, if I drop the appearance to 10 sets or less it works fine, anything over ten sets it will not ring or dead air. Any info would be appreciated.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
BCM 50
- Thread starter barenn
- Start date
koulioumbis
IS-IT--Management
Did you check with BCM Monitor?
Does the call come in and not ring? Or something else?
Nikos
Does the call come in and not ring? Or something else?
Nikos
- Thread starter
- #3
- Status
Similar threads
- Question
