BCM 50

[HopeUCX]

Good Morning,
Question about the BCM 50 - Rel 3. It resets once a day. Performed a level 2 reset. What is my next step/options?

 

[curlycord]

Perhaps the power supply or the hard drive is starting to fail.
Does the fan calm down during the boot sequence? temperature in the room if not?

________________________________________
We take the time to try to answer your questions for free, please return the favor and take the time to answer back and include any resolution you found elsewhere, thanks.

=----(((((((((()----=

http://www.curlycord.com

Toronto Canada

http://www.telcopc.ca

 

[HopeUCX]

Is there a way to verify that it is the hard drive? It has never lost memory. I did update it. The fan is working fine. Temperature does not seem to be a problem.

Hope

 

[curlycord]

No unless you take it out and attached to PC with a good program to verify.

Otherwise backup programming right away and swap out the PS.
If it happens again I suggest a new drive.


________________________________________
We take the time to try to answer your questions for free, please return the favor and take the time to answer back and include any resolution you found elsewhere, thanks.

=----(((((((((()----=

http://www.curlycord.com

Toronto Canada

http://www.telcopc.ca

 

[HopeUCX]

We already swopped the power supply and did a level 2 reset. Trying to get them to upgrade to a UCX.